Wurlitzer Direct Drive Gear Survey (for Wurlitzer Direct Drive Gear Study) Version of August 6, 2018. Copy (press Ctrl + A to select all text) and then paste the text into the body of an email message. Then, at your leisure, please answer what questions you can and omit the rest. Incomplete information is better than none. When finished answering questions please send the information to: webmaster@mechanicalmusicpress.com Contact Information Your First and Last Name: __________ Your e-mail address: __________ Owner's First and Last Name: __________ Show owner name in reports: __________. (Yes/No) Owner's Address: __________ City, State/Province, and Zip: __________ - - - - - - - - - - - - - - - - - - - - Piano Basic Information (omit if worm gear unit has been orphaned) Piano Style / Model: __________ Piano styles: 88 Note Player Piano; Pianino; Mandolin Quartette; Mandolin Sextette; A, B, C, D, E, I, or L 65 Note Pianos/orchestrions, Style G Photoplayer, Style O Photoplayer, Style W Photoplayer, etc. Piano serial number: __________ - - - - - - - - - - - - - - - - - - - - Direct Drive Worm Gear Standard If an Early Open Worm Gear Standard (with exposed gear and brass oil cups) Choose one option: * Tall Open Gear Standard, plain with NO rewind trip linkages (8-3/4” high): __________. (Yes/No) * Tall Open Gear Standard, with REWIND TRIP linkages (8-3/4” high): __________. (Yes/No) * Short Open Gear Standard (6-3/4” high): __________. (Yes/No) * Short Open Gear Standard mounted on a tall wooden block (6-3/4” high without spacer block): __________. (Yes/No) If a late Fully Enclosed Heavy/Worm Gear Standard (with enclosed gears) Choose one option: * Heavy Gear Standard (9-3/8” high); NO NAMEPLATE; with brass oil cups: __________. (Yes/No) * Heavy Gear Standard (9-3/8” high); Type: SA-200-HG-3; No oil cups; Gear: 81 teeth; Worm: 5 thread: __________. (Yes/No) * Heavy Gear Standard with incorrect nameplate (7-1/4” high), Type: SA-200-HG-1B; No oil cups; Gear: 51 teeth; Worm: 3 thread: __________. (Yes/No) * Worm Gear Standard (7-1/4” high), Type: SA-1B; No oil cups; Gear: 51 teeth; Worm: 3 thread: __________. (Yes/No) * Worm Gear Standard (7-1/4” high), Type: SA-BB; No oil cups; Gear: 51 teeth; Worm: 3 thread: __________. (Yes/No) Gear Unit Stub Shaft Choose one option: * 5-inch O.D. split wood pulley on stub shaft: __________. (Yes/No) * Pinned stub shaft; no pulley: __________. (Yes/No) * No pulley; stub shaft never pinned: __________. (Yes/No) The gear standard's crankshaft has a short stub shaft on the rear facing side. If a wooden pulley is to be attached a small hole is drilled through the stub shaft and a metal pin is inserted to protrude on both sides, and then a wooden pulley is clamped onto the stub shaft. The metal pin through the stub shaft keeps the wooden pulley from rotating on the shaft. Gear Standard Nameplate Data Title: __________ (Enter None if no namplate.) Type: __________ Gear: __________ Worm: __________ RPM: __________ Gear Standard serial number: __________ The gear standard 3 or 4 digit serial number, if any, is die-stamped onto the end cap for one of the high-speed worm shaft bearings. - - - - - - - - - - - - - - - - - - - - Motor Information (only if original motor) Motor make: __________ Motor Model: __________ Motor S/N: __________ Motor RPM: __________ - - - - - - - - - - - - - - - - - - - - Comments, History, and Explanations Comments: __________ Please include any additional information about the piano that might be pertinent, such as its history, i.e., various locations and owners. If you find a date (or style number), such as on a paper sticker inside or on the backside of the case, or on a pneumatic component, notice an early tuning date written by hand on the piano plate, find an original sales invoice, etc., please describe any such items. - - - - - - - - - - - - - - - - - - - - Thank you for your patience and interest in dealing with this detailed survey form. Your help is very much appreciated.